Analytical Quality by Design Assisted Spectroscopic Method Development for Estimation of Clevidipine Butyrate in Synthetic Mixture in Application to Greenness Study
Abstract
Two simple, rapid, cost-effective, precise and accurate UV spectrophotometric methods have been developed for the estimation of Clevidipine butyrate, a dihydropyridine calcium channel blocker and antihypertensive agent, using an analytical quality by design approach. The characterization of Clevidipine butyrate was performed by melting point, differential scanning calorimetry, and FT-IR techniques. Using the analytical quality-by-design approach, the critical method variables selected were scanning speed and sampling interval via Central Composite Design, which demonstrated the work's resilience and optimised methodology. A method for UV spectroscopy was developed using two methods – method I, based on the maxima absorption method of zero-order spectrophotometrics with λmax of 238 and 362 nm, and Method II, based on the zeroorder area under curve method, wavelength range 233–243 and 353–371 nm, respectively. Both the developed methods were subjected to validation as per the guidelines set by the ICH. The methods showed good linearity in the concentration, ranging from 2 to 12 µg/mL, while the % Recovery of the developed methods was in a range of 98.41–100%. The methods showed good sensitivity and appropriate precision with an RSD less than 2%, and the methods were applied for determination of the Clevidipine synthetic mixture. The developed method’s greenness profile was evaluated and compared using the AGREE and MoGAPI tools and were found to be in compliance with twelve principles of green analytical chemistry.
About the Authors
Shrutika DesaiIndia
Department of Pharmaceutical Chemistry
Wagholi, Pune, Maharashtra
Rohan Mane
India
Department of Pharmaceutical Chemistry
Wagholi, Pune, Maharashtra
Ajay Munde
India
Department of Pharmaceutical Chemistry
Wagholi, Pune, Maharashtra
Pranabesh Sikdar
India
Department of Pharmaceutical Chemistry, Royal School of Pharmacy
Guwahati, Assam
Charu Chandrakant Mehta
India
Department of Pharmaceutical Chemistry, School of Pharmaceutical Sciences
Wagholi, Pune, Maharashtra
References
1. E. D. Deeks, G. M. Keating, S. J. Kem, Am. J. Cardiovas. Drugs, 9, No. 2, 117–124 (2009), https://doi.org/10.2165/00129784-200909020-00006.
2. M. Norlander, P. Sioquist, H. Ericsson, L. Ryden, Cardiovas. Drug Rev., 22, No. 3, 227–250 (2004), https://doi.org/10.1111/j.1527-3466.2004.tb00143.x.
3. Clevidipine (butyrate), Drugbank online, https://www.drugbank.ca.drugs/DB04920 (Accessed on 1st February 2025).
4. Clevidipine (butyrate), Pubchem online, https://pubchem.ncbi.nlm.nih.gov/compound/Clevidipine (Accessed on 1st February 2025).
5. Clevidipine Injectable Emulsion, http://cleviprex.com
6. C. Pandya, S. J. Rajput, Int. J. Pharmacy Pharm. Sci., 10, No. 6, 159–164 (2018), https://doi.org/10.22159/ijpps.2018v10i6.26110.
7. C. Pandya, Development of Stability Indicating Assay Methods and Study of Degradation Behavior of Some Drugs and Formulation; https://shodhganga.inflibnet.ac.in/handle/10603/302960
8. H. Zhang, Curr. Opin. Investig. Drugs, 3, No. 10, 1474–1478 (2002), https://pubmed.ncbi.nlm.nih.gov/12431021/.
9. L. Huang, H. Sun, B. Yang, S. Yang, Chin. J. Mag. Res., 1, 168–175 (2011), http://ma- gres.apm.ac.cn/EN/Y2011/V28/I1/168.
10. O. Gyllenhaal, Frenesius, J. Anal. Chem., 369, No. 1, 54–56 (2001), https://doi.org/10.1007/s002160000586.
11. Y. Zhou, Q. Zou, L. Sun, P. Wei, P. Ouyang, J. Chromatogr. Sci., 53, 830–835 (2016), https://doi.org/10.1093/chromsci/bmu100.
12. Y. Zhou, H. Li, X. He, M. Jia, Y. Ni, J. Pharm. Biomed. Anal., 100, 294–299 (2014), doi: https://doi.org/10.1016/j.jpba.2014.08.018.
13. T. Chen, S. Zhang, P. Ye, F. Zhang, Y. Ni, Chin. J. Clin. Pharm. Ther., 3, 306–312 (2016), https://caod.oriprobe.com/articles/48205726/Simultaneous_quantification_of_clevidipine_and_its.htm.
14. A. K. Mishra, S. L. Neha, L. Rani, H. K. Devangan, P. K. Sahoo, Lett. Drug Design Drug Dis., 21, 888–896 (2024), https://doi.org/10.2174/1570180820666230126121026.
15. A. S. Patil, A. A. Shirkhedkar, Pharm. Methods, 7, No. 2, 127–131 (2016), https://doi.org/10.5530/phm.2016.7.19.
16. Clevidipine Emulsion Formulation Containing Antimicrobial Agents. Patents US20120088804 AI, https://patents.google.com/patent/US20250057825A1/en.
17. Guideline ICH. Validation of Analytical Procedure: Methodology Q2B, in: International Conference on Harmonisation, IFMPA, Geneva (Switzerland) (1996).
18. K. Sahare, A. Hemke, S. Dhawale, M. Umekar, Res. J. Pharm. Tech., 14, No. 2, 628–632 (2012), https://doi.org/10.5958/0974-360X.2021.00112.8.
19. G. G. Patil, R. S. Bhave, P. S. Bhobade, D. R. Telange, S. B. Ganorkar, A. A. Shirkhedkar, J. Appl. Spectrosc., 92, No. 2, 446–454 (2025), https://doi.org/10.1007/s10812-025-01930-0.
20. P. Prajapati, V. Pulusuru, S. Shah, Future J. Pharm. Sci., 10, No. 43, 1–15 (2024), https://doi.org/10.1186/s43094-024-00615-3.
Review
For citations:
Desai Sh., Mane R., Munde A., Sikdar P., Mehta Ch.Ch. Analytical Quality by Design Assisted Spectroscopic Method Development for Estimation of Clevidipine Butyrate in Synthetic Mixture in Application to Greenness Study. Zhurnal Prikladnoii Spektroskopii. 2026;93(1):142/1-142/11.
JATS XML





















